Do It Yourself Above Ground Sprinkler System

The gpm value for your new sprinkler system should be based on the size of the existing water supply pipe running to your house. If you have manual drains, you'll need to use an air compressor with pressure between 50 and 100 psi.

DIY ABOVE GROUND Sprinkler System (2020 UPDATE!) YouTube

You also need a few fittings and a couple of hours to set the system up and get it running.

Do it yourself above ground sprinkler system. Hauling heavy water buckets, standing for hours spraying the hose, or installing an expensive underground irrigation system isn't necessary to keep your lawn looking good. 1 is a good diameter for the main lines because the large diameter helps distribute the pressure more evenly. 40 to 360 sprinkler location:

Calculate how many pulsating sprinklers you can use on each line. Connection to the main water supply is downstream of your water meter. Keep a large front, back and side yards well watered all summer long with this diy sprinkler system.

If so, simply turn off the water supply, open the valves and allow excess water to drain from the system. In stock on june 8, 2021. Draining the water out of your sprinkler system is not enough to prevent potential freezing and damage to water pipes.

It is rated to cover more ground, up to 80 feet. Valves that are grouped together are called a manifold. You want to glue the inside of the piece you are attaching it too and the outside of the pipe that is going into the piece.

In order to completely winterize the system, you must blow the system clear of all water. You will of course, need a hose and you can use small pvc pipe for this. Valve manifold location one valve will be used for each zone.

This can be done by manually draining the system and then using an air compressor to completely remove any remaining water. 3.8 out of 5 stars. You can set a timer to water at certain times of the day or link it to a smart sprinkler control system at an offsite weather center, which only waters your lawn when the conditions call for it.

Its best to limit the length of your 1/2 supply lines for this reason. See more ideas about sprinkler system, above ground sprinkler system, sprinkler. Mark the location on your plan.

No digging is required, all the components of this lawn sprinkler system will be on top of the ground. This diy system is so easy to make and it only requires a few materials. A simple and interactive tool, fun to use, that will tell you which system is best for your needs, and how many sprinklers are required.

Even though the system is above ground, it is easy to. Free shipping on orders over $25 shipped by amazon. The beginning of any irrigation system is the point at which it ties into the main water supply, and before you do this, you need to check the water pressure and flow rate at the closest valve preferably an outdoor one to make sure the water system can support a sprinkler system.

Glue the shorter pieces across from each other. A soaker hose will deliver water right to the roots of your plants, where they need it. Here is a great youtube video explaining how to connect the 1 poly pipe to the flexible sprinkler supply lines.

Rotating Lawn Sprinkler in 2020 Sprinkler, Lawn